High security mobile speedbumps

TiSO high security mobile speedbumps are reliable compact solution to provide 100% security of your territory. Such equipment does not require deep mounting into the ground. Moreover, Speedbump requires up to 30 minutes to be installed. High security Mobile Speedbump was tested and certified according to ASTM F2656/F2656-15 and IWA14-1:2013 standards.
It is hydraulic operated and can be stoped during the moving cycle (manual release in case of power failure) High security Mobile Speedbump has warning LED indication and warning painting (black /yellow or red/white). Also can be interfaced with any ACS or controlled from push.

Product specifications and complete sets may differ from that shown on the photo.

  • Datasheet
  • Drawings
  • Certificate
  • Specifications
  • Gallery
  • Manual
High security mobile speedbumps

RB358
(ASTM F2656/F2656M-15, P3 and IWA 14-1:2013, Blocker V/7200[N2B]/48/90:23.1)

datasheet of High security mobile speedbumps

Drawing of high security mobile speedbump
RB358
(ASTM F2656/F2656M-15, P3 and IWA 14-1:2013, Blocker V/7200[N2B]/48/90:23.1)

Download
Technical specs:
Model RB358-02 RB358-03 RB358-04
Security class Designed to keep ASTM F2656 M30 standard ASTM F2656/F2656M-15, M30, P3 (22.5 m)
IWA 14-1:2013, Blocker V/7200[N2B]/48/90:23.1
Designed to keep ASTM F2656 M30 standard
Installation type Above the ground
Drive Hydraulic (bild-in)
Width, mm 2000 3000 4000
Height, mm 570
Load per axle, t 15
Rising time, sec 5,0 5,2 5,5
Lowering time, sec 4,0 4,1 4,2
Operating temperature*, °C -40 / +60
Power supply 1 phase 230 V, 50/60 Hz
Protection level IP 67 for road blocker
IP 55 for control box
Materials - Structural steel (galvanized and powder coated)
* for temperatures lower than -10 °C use the heating device / for temperatures higher than +40 °C use the cooler device
Contact us for more information
  • e-mail: sales@tiso.global
  • 14 Promyslova str., 02088, Kyiv, Ukraine
  • tel.: +380 (44) 291-21-11

SUBSCRIBE TO NEWS

Fields marked with an asterisk (*) are required.